#Sound tools wallcat install
#Sound tools wallcat plus

If you are not happy with it within the first year, you can return it for. What is the best way to make a fan out from Cat5/6 cable?īut our budget is nearly non-existant, which is the reason I'm using Cat cable instead of actual multipair snake cable anyways, so $120 x 5 stage boxes is too much. LIFETIME WARRANTY - The SoundTools WallCAT 8 is part of our Happy Human Warranty. So despite them sharing the ground connection, the other channels in the box will not get voltage when phantom is sent to just one. No! because +48 is sent over pins 2 and 3, pin 1 only provides the ground. Īre there any consequences to this approach? Looking at the PCB traces on this panel it appears so. SoundTools WALLCAT MX-S Overview Send audio over shielded Ethernet cable with the silver SoundTools WallCAT MX-S Wall Plate. Is this how RAT does it in their (expensive) superCAT cables, boxes, and tails? Share the drain wire to all the XLR connectors' pin 1? I'll be plugging in condensers and active DI's so I will need this. Thanks to channel isolation, you can also send a DMX signal and balanced audio simultaneously. It has four female XLR terminals on the front and two Ethernet terminals on the back for passing audio over Ethernet to support long cable runs. Well yeah, it will work, but what about phantom power? Without pin 1, no +48. Send audio over shielded Ethernet cable with the black SoundTools WallCAT FX-B Wall Plate. Leave all the grounds disconnected and call it good? How can I get 4 channels of balanced and shielded audio over 9 wires?

I will be sure that the cable we order is shielded and has the extra drain wire. Because we are wiring the whole building for low voltage, I will have bulk Cat6 or Cat6a cable available and would like to run the stage boxes with those, probably hard-wired to the XLRs in the stage box, and made to fan out on the other end to the main snake. Each box has either 4 XLRs or 3 XLRs and 1 NL4.

#Sound tools wallcat install

I would just run some heavy, shielded multipair.I've got some pop-up stage boxes from Parts Express to install in a stage for a new venue. Choose from either input or output across 4 XLR channels that utilizes Cat5e, Cat6. SoundTools WallCAT 4 MX Black Wall panel two gang with 4x male XLR to RJ45. The SoundTools WallCAT 8 is an easy-to-install 2 gang wall plate. Home / Brands / SoundTools / SoundTools WallCAT 4 MX Black Wall panel two gang with 4x male XLR to RJ45. Events & Workshops About Us Terms & Conditions Contact. If you want to do this correctly you have to go with a digital format which will be costly and mean your preamps have to stay in the live room. Speakers Lighting Video Infrastructure 19 Inch Racks Accessories. Outdoor rated shielded cable is not cheap, stranded is really not fun to work with, and it is much more fragile than audio cable. Or buy a cheap stage box and cut the ends of it and solder them back on. For digital signals we reccommend distances up to 330 ft as per AES/EBU standards.

The results will vary with other CAT5 brands. If it’s a really short run you probably won’t notice the difference unless there is electrical interference, but if it’s such a short run. For balanced analog weve achieved distances of over 600ft using our SuperCAT cable. but you’re still running your signal over very thin copper. So you can buy this fancy box with a nice connector on the back of it.

#Sound tools wallcat plus

Shielded cat5 (or 6 or 7) has 8 wires plus the shield. It has four male XLR terminals on the front and two Ethernet terminals on the back for passing audio over Ethernet to support long cable runs. So the audio lines are not shielded from each other. SoundTools WALLCAT MX-B Overview Send audio over shielded Ethernet cable with the black SoundTools WallCAT MX-B Wall Plate.

There is no digital component to this product as far as I can tell, and you have to use shielded cable to do it. This is a decent way to get quick cheap stage boxes out, but this is analog audio.